|
|
Post by joshinator99 on Jul 28, 2019 20:44:43 GMT -5
Exactly. You always find out something. On my Camaro, I found that I had forgotten to adjust the fuel system pressure being commanded, so it started loosing rail pressure even though the hardware was the correct size. Easy fix, but I wouldn’t have known if I didn’t spend the time on the dyno.
|
|
|
|
Post by cmturner on Jul 31, 2019 8:00:37 GMT -5
New boost controller installed, now to get it programmed correctly (don't mind the dirty engine bay, been needing to clean it)   |
|
|
|
Post by cmturner on Nov 12, 2019 21:15:26 GMT -5
So the OEM mirror completely died on me, no lights, dimming or anything (even tested it on the bench and still nothing) So bought a aftermarket one, it has reverse camera and dash cam all in one, Also gives your GPS speed as well. Alittle pricy but well worth it www.amazon.com/dp/B07CMK74JJ/ref=cm_sw_r_cp_apa_i_fEXYDb9CW8DBY    |
|
|
|
Post by namelessfoe on Nov 12, 2019 22:55:11 GMT -5
Does it have any lights on it like the oem?
|
|
|
|
Post by cmturner on Nov 13, 2019 6:11:07 GMT -5
Does it have any lights on it like the oem? No it doesn't, one thing I wish it did have |
|
|
|
Post by cmturner on Dec 16, 2019 17:40:02 GMT -5
Playing with some carbon fiber, Going for the forged carbon fiber look, Do wish I would of went with a thinner chopped carbon fiber though, but coming out good so far, This was after first leveling sanding and another coat of resin Still have lots of coats and sanding to go   |
|
|
|
Post by cmturner on Mar 23, 2020 7:51:04 GMT -5
So about new years, started having a humming noise when in second or higher every time you pushed the gas pedal, slowly kept getting louder and louder, didn't have a grinding sound, more of a humming or winning sound. Turns out my F200 clutch was bad, so replaced it with a Fx350 clutch, Also replaced all the bearings in transmission (even though could not find anything wrong with them). But regardless looks like it has resolved the issue     |
|
|
|
Post by cmturner on Mar 23, 2020 7:53:40 GMT -5
|
|
|
|
Post by Sabertooth on Mar 23, 2020 9:24:42 GMT -5
That came out neat. What's the blue from?
|
|
|
|
Post by cmturner on Mar 23, 2020 9:25:19 GMT -5
That came out neat. What's the blue from? I put blue glow powder in the resin, so glows at night |
|
|
|
Post by Sabertooth on Mar 23, 2020 12:38:53 GMT -5
That's a really neat addition
|
|
|
|
Post by cmturner on Mar 23, 2020 12:46:00 GMT -5
That's a really neat addition Thank you |
|
|
|
Post by namelessfoe on Mar 29, 2020 16:41:45 GMT -5
the carbon looks awesome. great job.
|
|
|
|
Post by cmturner on Mar 30, 2020 9:52:13 GMT -5
the carbon looks awesome. great job. Thank you |
|
|
|
Post by cmturner on May 23, 2020 11:53:32 GMT -5
Cleaned up the wiring harness, removing all the old factory wiring covers, made some carbon fiber intercooler piping(not my best job but gets the job done for now), made new turbo inlet as well for bigger turbo, Runs great!!! And whistles loud as hell!!!    |
|
