|
|
Post by mitsuspeed07 on May 30, 2019 21:29:15 GMT -5
Ok everyone I have blue underglow on my baby not legal for street use so I wanna wire it to work with dome lights so it flashes when car locks comes on when unlocked or door opens so my question is where do I splice my power wire in at?
|
|
|
|
Post by namelessfoe on Jun 2, 2019 22:52:48 GMT -5
don't quote me, but i'm pretty sure you are going to have to track down the power wire going to the dome light and tap into it.
|
|
|
|
Post by mitsuspeed07 on Jun 5, 2019 20:29:09 GMT -5
Ok thanks that's what I was thinking to just not good wit electrical so trying to find answers b4 I do it underglow isn't street legal in pa so figure that would be the best route not to mention would be sweet
|
|
|
|
Post by mitsuspeed07 on Jun 5, 2019 20:31:28 GMT -5
Almost think I'm gonna have to have 2 hot wires 1 constant and 1 switched I'll keep digging for info and when I figure it out I'll post it if found info else where
|
|
|
|
Post by namelessfoe on Jun 9, 2019 22:42:24 GMT -5
You could do some probing and find what line receives power when door is opened or key fob is used. Don't know if you are going to run into any problems with it being a delay relay for interior lights.
|
|
