|
Post by Sabertooth on Nov 4, 2019 21:06:03 GMT -5
To my knowledge, this is the only 4G69 with a "popcorn tune" now.
Last night I was screwing around while setting up my MAF, and set my ignition values below 64 load and above 4000rpm to 0 degrees spark timing across all the maps. Here's a video my friend took of a quick second gear pull then lift (~40-80km/h)
|
|
|
Post by cmturner on Nov 7, 2019 4:47:47 GMT -5
Awesome, I need to work on mine as well to get the popping, love the sound, mine will occasionally get a pop or two, but nothing like the video
|
|
|
Post by Sabertooth on Nov 7, 2019 10:09:08 GMT -5
I could probably add it to your ignition maps. I don't know if fastworks will let me load a tune for a different vin but we can try
|
|
|
Post by cmturner on Nov 12, 2019 21:16:58 GMT -5
I could probably add it to your ignition maps. I don't know if fastworks will let me load a tune for a different vin but we can try Yea it won't let you look at other VIN # tunes, if tried, But Hackish showed me how to do it, so I'm all set now
|
|
|
Post by Sabertooth on Nov 13, 2019 16:39:28 GMT -5
Awesome. Mind sharing what his suggested method was?
|
|
|
Post by cmturner on Nov 13, 2019 16:48:03 GMT -5
Awesome. Mind sharing what his suggested method was? Yep, so on the high octane ignition map, and high octane mivic ignition map you will change the top two lines Here is a before
|
|
|
Post by cmturner on Nov 13, 2019 16:48:16 GMT -5
And after the change, this is for the maximum popping, I took the before and after map, and cut it directly in half, and came out perfect, not too loud, but just enough bubbling sound
|
|
|
Post by cmturner on Nov 13, 2019 16:48:29 GMT -5
And what I set it too
|
|
|
Post by hackish on Oct 1, 2020 9:52:01 GMT -5
Do the top two rows. For more popping love, you can disable the DFCO so the car never hits decel fuel cut. Keep in mind this will happily blow your cats right out the tailpipe.
|
|
|
Post by Sabertooth on Oct 2, 2020 6:32:02 GMT -5
It'll sure catch you off guard on the highway too!
|
|